Click To Call(727) 591-3365Click To Get A Free Estimate
Reddish brick paver walkway with a clean even sealed finish and tight joints

Brick that keeps its warm color and tight joints

Brick Paver Sealing in St. Petersburg, FL

Call (727) 591-3365 for a free price to wash and seal your brick pavers.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.25 to $2.50 a sq ft to clean, sand and seal
Call Now(727) 591-3365
Brick pavers

Can I get brick paver sealing in St. Petersburg, and how quickly will someone answer?

Yes, a local contractor can seal brick pavers across St. Petersburg, FL, and expect a reply the same day or the next business day at the latest. The estimate is free and booking is optional. To get started, call (727) 591-3365.

Brick has a warm color that turns chalky and gray without a coat, and its joints open up with rain. A seal brings the red back, keeps sand in the seams and makes weeds and ants work harder. Mention whether your brick is old street brick, a walk or a newer driveway, and say which parts stay shaded, when you request a free estimate.

Call (727) 591-3365

Is old St. Petersburg brick different from newer brick pavers?

It can be, and the difference changes the wash. Paver Ink says historic brick in Old Northeast and Kenwood has a soft face and often lime based joints, so cleaning goes slower at lower pressure. Snell Isle and Shore Acres more often have concrete pavers on a compacted base. Name the kind you have when you request a free estimate.

Old brick is a local trademark. Most of the east west avenues in Kenwood are still brick, according to Wikipedia, with hexagon block sidewalks and granite curbs, and a local real estate guide describes Old Northeast the same way. A soft faced brick can lose its surface to a hard blast, so the question to ask is what pressure the contractor will use. To ask it now, call (727) 591-3365.

Pricing

What does it cost in St. Petersburg to seal brick pavers?

No company page opened for this site gives a price for brick alone. Rusty's Pro Wash and Seal publishes $1.25 to $2.50 per square foot for Tampa Bay and Washy Bear publishes $1.50 to $2.50, and brick is normally priced the same way. The table is built from the published pieces. To get a written number for your brick, request a free estimate.

Slow work costs more. Soft old brick that needs a gentle wash takes longer, and Rusty's Pro Wash and Seal says surface condition and repairs change the bid. It also says routine care runs $1,000 to $3,000 while major restoration runs $3,000 to $8,000 or more. To compare a bid with these figures, call (727) 591-3365.

Brick paver jobPublished priceWhere it comes from
Clean, sand and seal, per sq ft$1.25 to $2.50Rusty's Pro Wash and Seal; Washy Bear lists $1.50 to $2.50
Routine cleaning and sealing, whole project$1,000 to $3,000Rusty's Pro Wash and Seal
Major restoration of worn brick$3,000 to $8,000 or moreRusty's Pro Wash and Seal
Removal and replacement$5,000 to $15,000 or moreRusty's Pro Wash and Seal

No page opened for this site publishes a rate for brick pavers alone, so this table is built from the pieces that are published: the per foot range and the cost bands for care, restoration and replacement. Sealing early costs a fraction of what replacing worn brick costs.

Get a Free Estimate

Hand broom spreading sand across a red brick walkway, a washed strip beside an unwashed one

What brick surfaces around a St. Petersburg home can be sealed?

Any brick paved area can take a coat, from a front walk to a driveway apron. Each surface has its own habits, so each gets a plan. A short list of the common ones is below. If your brick is not on it, call (727) 591-3365.

Historic street brick

Old Northeast and Kenwood brick has a soft face and lime based joints, according to Paver Ink, so it is washed gently and slowly.

Brick look driveways

A newer driveway usually sits on a compacted base and can take the firmer wash Washy Bear lists, 3,000 to 4,000 PSI with a surface cleaner.

Courtyard and entry brick

Shaded entry brick holds moisture, which Premier Coatings links to algae and efflorescence on unsealed pavers.

Brick edging and steps

Steps and borders have many edges, and Premier Coatings says edges are touched up before the final coat.

How does efflorescence show up on brick pavers, and does sealing help?

Efflorescence is the white haze that comes from salts in the paver. Premier Coatings says unsealed pavers develop it, along with shifting joints, and Unilock says it typically fades in 2 to 3 months but can last a year. Sealing before it is gone can trap a haze under the coat, so the contractor waits. To ask whether your haze is ready for a coat, request a free estimate.

New brick needs patience as well. Unilock says to wait 60 to 90 days after installation before sealing, because sealing too early traps moisture. If your pavers were laid recently, give the install month when you call (727) 591-3365.

How it works

What is the brick paver sealing process from first look to final coat?

Premier Coatings describes seven steps: a deep clean with pressure wash, algaecide, a rinse, polymeric joint sand, cleanup with masking, a moisture check and then a flood coat of sealer. Paver Ink adds two coats on dry pavers. Washy Bear sprays the sealer evenly and then checks coverage. The order is what matters, and a skipped step shows later. To confirm the order for your brick, call (727) 591-3365.

Brick adds one more check. A contractor tries the cleaner on a small spot first, because soft brick and lime joints do not tolerate a strong chemical or a hard stream. Unilock suggests a fan nozzle about 12 inches away at a 30 degree angle. If your brick is old, ask how the test spot will be done when you request a free estimate.

Which finish suits brick: natural, satin or wet look?

Natural or matte keeps the brick looking like stone. Premier Coatings calls it closest to raw stone with minimal sheen, and Washy Bear lists a clear coat with a natural matte look. A wet look deepens the red and brown tones, though Unilock says gloss gets slippery when wet. For walks and steps, grip should win. To see how each looks on a small patch, request a free estimate.

A semi gloss wet look suits sunny driveways where color depth is the goal. Satin sits in the middle with a soft sheen. Unilock also says to seal in one session so the gloss stays even across the whole surface, so ask for one continuous visit when you call (727) 591-3365.

How long does a brick paver seal last in St. Petersburg?

Expect two to five years, depending on the source and the spot. Premier Coatings says most Pinellas homes reseal every 2 to 3 years, Rusty's Pro Wash and Seal says 3 to 5, and Unilock says solvent based sealer can last 4 to 5 years if maintained. Brick in full sun and salt spray sits at the short end, and shaded walkways at the long end. To plan a visit, request a free estimate.

Service area

Which St. Petersburg neighborhoods can get brick paver sealing?

Brick shows up across the city. Kenwood's homes date from 1912 to 1945, with brick avenues, Old Northeast has brick streets and Snell Isle began in 1925. Many of the homes there are Mediterranean style, while the Grand Central District is known for Craftsman homes. Contractors serve every place linked below. If your street sits inside a historic district, ask the city about review before changing a finish, then call (727) 591-3365.

Photos

How does sealed brick look on St. Petersburg walks and drives?

Freshly sealed paver driveway on brick in an older St. Petersburg block
Sealed paver pool deck on brick in an older St. Petersburg block
Sealed paver patio behind the home on brick in an older St. Petersburg block
Sealed paver walkway to a front door on brick in an older St. Petersburg block
Close view of freshly sealed pavers on brick in an older St. Petersburg block
Paver area with one cleaned half beside a dirty half on brick in an older St. Petersburg block
Contractor cleaning pavers on brick in an older St. Petersburg block
Contractor sealing or sanding pavers on brick in an older St. Petersburg block
Questions

What do St. Petersburg homeowners ask about brick paver sealing?

What should I clean pavers with before sealing?

A contractor chooses by what is on the brick. Premier Coatings lists a deep clean that removes dirt, algae and efflorescence, then an algaecide, and Washy Bear uses flat surface cleaners that lift dirt, algae and oil. Because sealer locks in leftovers, the surface is washed first and then left to dry.

What are the downsides of sealing pavers?

The main ones are the repeat cost and the finish. Rusty's Pro Wash and Seal says resealing comes every 3 to 5 years, and Premier Coatings says 2 to 3 in Pinellas. Unilock says gloss gets slippery when wet and that sealing new pavers early can trap moisture and cause haze.

How often should I seal pavers in Florida?

Premier Coatings says most Pinellas homes reseal every 2 to 3 years, with sun and salt spray pushing toward 2, and Washy Bear agrees. Rusty's Pro Wash and Seal gives 3 to 5 years for Tampa Bay. Shaded, low traffic brick can reach the longer end.

What is the average cost to seal pavers in Florida?

Rusty's Pro Wash and Seal publishes $1.25 to $2.50 per square foot for Tampa Bay, and Washy Bear publishes $1.50 to $2.50. Neither page prices brick alone, so brick uses the same range. Soft old brick that needs a slower wash can take more time and cost more.

Is the water in St. Petersburg, Florida hard?

Hard to very hard, by one estimate. Waterhardness.org lists ZIP 33710 at 184 PPM, or 10.8 grains per gallon, and calls it very hard, while noting that readings vary by utility and address. Hard water leaves mineral spots, so Premier Coatings advises aiming sprinkler heads away from pavers. Ask the contractor to look at any rings near the beds.

Is old street brick different from modern clay brick pavers?

Paver Ink says historic Old Northeast and Kenwood brick has a soft face and often lime based joints, so it gets slower cleaning at lower pressure. Newer concrete pavers on a compacted base, which Paver Ink places in Snell Isle and Shore Acres, take a firmer wash.

Does sealer stop efflorescence on brick pavers?

It slows it only when the pavers are ready. Unilock says efflorescence typically fades within 2 to 3 months and can take up to a year, and that sealing must wait until it is gone or haze can form under the coat. Premier Coatings says unsealed pavers develop the haze more easily.

Will sealer change the color of my brick pavers?

It can. Washy Bear says a clear coat keeps a natural matte look, while a wet look semi gloss deepens color. Premier Coatings lists natural, satin and gloss, and says a gloss finish gives maximum color depth. A test patch shows how your own brick reacts.

Can I seal brick pavers myself with a sprayer?

Contractors use a sprayer or a short pile roller and follow with a dry roller to pick up extra product, according to Unilock, which also says sealer will not wash off once it lands. Because streaks, hazing and overspray are hard to undo, most homeowners leave it to a contractor.

Let the brick glow again

Ask for a free estimate by phone or form, and a local contractor answers within one business day, usually much sooner.

Call (727) 591-3365

Free, no obligation