
Paver driveway color that survives tires and sun
Driveway Paver Sealing in St. Petersburg, FL
Ask a local contractor to seal your paver driveway, then call (727) 591-3365 for a free price.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Do you serve my paver driveway in St. Petersburg, and what happens after I ask?
A local contractor can seal a paver driveway anywhere in St. Petersburg, FL, and a first reply comes inside one business day, often the same morning. The estimate is free, and the decision stays with you. To start, call (727) 591-3365.
A driveway works harder than any other paver surface at a house. It carries tires, drips and leaves, and it faces the sun with no roof overhead. Sealing darkens the color, holds the joint sand and makes oil and leaf stains easier to lift. Give the contractor the size and the number of cars, then request a free estimate.
What does it cost in St. Petersburg to seal a paver driveway?
What the companies publish
Rusty's Pro Wash and Seal lists a 1,000 square foot driveway at $1,250 to $2,500, built on its $1.25 to $2.50 per square foot range for Tampa Bay. Washy Bear lists $1.50 to $2.50. The table shows each published piece. For a price on your own drive, request a free estimate.
Why a short drive can cost more per foot
Rusty's says large jobs can approach $1.00 a foot and small ones meet a $500 to $1,000 minimum, which is why a short single car drive can price higher per foot. Oil, deep stains and pavers that have sunk all change the bid. With a quote in hand, call (727) 591-3365 and compare it with these figures.
| Driveway job | Published price | Where it comes from |
|---|---|---|
| Clean, sand and seal, 600 sq ft | $750 to $1,500 | Rusty's Pro Wash and Seal rate of $1.25 to $2.50 a sq ft |
| Clean, sand and seal, 1,000 sq ft | $1,250 to $2,500 | Rusty's Pro Wash and Seal driveway example |
| Driveway plus pool deck, 2,000 sq ft | $2,000 to $4,000 | Rusty's Pro Wash and Seal example |
Neither company prices a driveway on its own page as a separate service apart from these examples, so the 600 square foot row is the published per foot rate multiplied by the size. Repairs, leveling and stripping an old coat are quoted separately.
What wears out a paver driveway in St. Petersburg?
Sun and shade
Sun is the constant. Wikipedia counts about 361 sunny days a year, and Premier Coatings says UV sets stains and speeds color loss. A drive in full sun fades first, while one under an oak grows algae along its edges. Rusty's Pro Wash and Seal says driveways often need resealing closer to the 3 year mark. For a read on how yours is aging, call (727) 591-3365.
Tires, drips and turning spots
Tires add their own wear. Oil drips, brake dust and the turning point near the garage show first, and cars press on the joints where they park. A fresh coat does not repair a weak base, but it does keep sand in place and makes spills easier to clean. Point to the worst spots on the drive when you request a free estimate.

How does the driveway sealing process work from wash to parking?
A driveway job follows a fixed order, and a good bid names each step. Washy Bear lists inspection, deep washing, polymeric sand and sealer. Premier Coatings adds an algaecide and a moisture check before a flood coat. To confirm the order on your own job, call (727) 591-3365.
1. Check drainage and sand levels
The contractor looks at joint depth, the slope toward the street and any pavers that rock under a wheel.
2. Treat oil and tire marks
A degreaser goes on the parking spots before the wash, since sealer locks in oil along with everything else.
3. Surface cleaner pass
A flat surface cleaner runs across the drive in even lanes, which is gentler on the joints than a bare wand.
4. Joint sand when dry
Polymeric sand is swept in once the pavers have dried and then misted so it hardens and holds the edges.
5. Sealer and a parking plan
The sealer goes on in an even coat, and the contractor names the hour that cars can return, usually the second or third day.
Which sealer holds up under cars, solvent based or water based?
Traffic and sealer type
Unilock says solvent based sealer suits high shine and high traffic areas and lasts about 4 to 5 years with upkeep, while water based sealer suits lower gloss in lighter traffic. A family driveway can take either, so ask which one is planned. To see the choices, request a free estimate.
Finish and coverage
Washy Bear lists a water based acrylic clear coat for a natural matte look and a semi gloss wet look. Unilock gives coverage of 80 to 120 square feet a gallon for solvent products and 100 to 150 for water based, so the product choice also changes how much sealer your drive needs. Ask for the coverage figure from the label when you call (727) 591-3365.
How long until cars can go back on a sealed paver driveway?
Cars need the longest wait of any surface. Washy Bear says 24 hours for feet and 48 for vehicles, Rusty's Pro Wash and Seal says 48 to 72 hours for cars, and Premier Coatings says 24 to 48. The safe plan is to leave the cars on the street for two days and to ask the contractor to confirm. If you park on the drive daily, request a free estimate.
Guests count as traffic too. A delivery truck or a visiting car on day one can leave a tire mark in a soft coat, so the contractor marks the drive off with cones or tape if needed. Washy Bear and Rusty's Pro Wash and Seal both describe a longer wait for vehicles than for feet for this reason. To arrange parking for the days ahead, call (727) 591-3365.
Do oil spots and tire marks come out before the driveway is sealed?
They are treated first, because a coat of sealer locks in whatever it covers. Washy Bear says commercial flat cleaners lift oil spots and tire marks on a driveway. Stains that soaked in for years can fade without disappearing entirely. To have the spots looked at before a quote, call (727) 591-3365.
Does leaf and oak shade change a paver driveway job?
It does. Premier Coatings recommends keeping leaves off the surface to prevent tannin stains, and Paver Ink says heavy canopy at the front of many St. Petersburg lots grows algae that needs treatment and gentle cleaning. Lakewood Estates is described as having mid century homes on larger lots with mature tree cover. Describe your trees when you request a free estimate.
Sprinklers matter too. Premier Coatings suggests aiming irrigation heads away from the driveway, and Unilock asks that sprinklers stay off while sealer cures. Tell the contractor where your heads spray when you call (727) 591-3365.
What time of day and what weather suit driveway sealing?
Heat and moisture decide it. Unilock asks for 50 to 90 degrees with 75 ideal and clear skies for 24 to 48 hours before, and warns that hot pavers can stain or peel. A south facing drive can be hot by midmorning in summer, so some contractors start early. If a storm is forecast, the job moves. To book a day with a weather check, call (727) 591-3365.
Which St. Petersburg neighborhoods get driveway paver sealing?
Driveways differ across the city. Kenwood grew between 1912 and 1945 on a plateau about 50 feet above sea level, Shore Acres is the lowest lying neighborhood, and Snell Isle has no island wide HOA but some parcels carry deed restrictions. If an association governs your street, check its color and finish rules first. Contractors serve every place linked below, and request a free estimate.
How do sealed paver driveways look around St. Petersburg?








What do St. Petersburg homeowners ask about driveway paver sealing?
What is the average cost to seal pavers in Florida?
Around Tampa Bay the published rate is $1.25 to $2.50 per square foot, and Washy Bear lists $1.50 to $2.50. Rusty's Pro Wash and Seal puts a 1,000 square foot driveway at $1,250 to $2,500. Oil stains, loose pavers and old sealer that must be stripped can raise the figure.
What are the downsides of sealing pavers?
Sealer is a cost that repeats every few years, since Rusty's Pro Wash and Seal says 3 to 5 and Premier Coatings says 2 to 3 in Pinellas. Unilock adds that gloss turns slippery when wet and that sealing new pavers too early traps moisture. Sealer also does not fix a sunken or rocking drive.
How often should I seal pavers in Florida?
Rusty's Pro Wash and Seal says 3 to 5 years and notes that driveways often need it closer to 3. Premier Coatings and Washy Bear both say 2 to 3 years along the Pinellas coast. Cars, sun and oak leaves wear a drive faster than a covered patio, so plan on the shorter end.
How to seal a driveway after pressure washing?
A contractor waits for the pavers to dry, then fills the joints with polymeric sand and seals. Unilock says that takes a few hours in warm sun and about 24 hours in shade, with clear skies for 24 to 48 hours beforehand. Sand that washed out comes first, and it is misted so it sets.
How long before I can park on a sealed paver driveway?
Plan on at least 48 hours. Washy Bear says 24 hours for feet and 48 for vehicles, and Rusty's Pro Wash and Seal says 48 to 72 hours for cars. Premier Coatings advises keeping vehicles off for 24 to 48 hours. If the driveway is the only parking, ask for a plan to move the cars.
What pressure is safe for cleaning paver driveways?
Higher than a pool deck but not unlimited. Washy Bear lists 3,000 to 4,000 PSI with a commercial surface cleaner for driveway brick pavers, and Unilock warns that a fan nozzle about 12 inches away is safer than a hard stream, which can strip joint sand. The surface cleaner keeps the wash even.
Should a paver driveway get a solvent based or water based sealer?
It depends on traffic and finish. Unilock says solvent based sealer suits high shine and high traffic and lasts 4 to 5 years if maintained, while water based sealer suits lower gloss in lighter traffic. Washy Bear lists a water based acrylic clear coat and a semi gloss wet look. Ask which one is planned and why.
Do oil stains and tire marks come out before sealing?
They are treated first, because sealer locks in whatever is on the surface. Washy Bear says commercial flat cleaners lift oil spots and tire marks before sealing. Old stains that have soaked in may fade but not vanish.
Does tree cover change how a paver driveway ages?
Yes. Premier Coatings says to keep leaves off the surface to prevent tannin stains, and Paver Ink says heavy canopy grows algae where shade stays damp. Lakewood Estates and parts of Kenwood have mature oaks, which means more leaf stains and more green edges on a drive there.
Want the driveway to look new again?
Call or send the short form and a contractor writes back within one business day, usually much sooner.
Free, no obligation
